we picked up this machine that sat for a long time due to its engine being bad. after looking into the original motorcycle engine to see if we could fix it and found that it was no good, it was time to make our own drive train. lets see if what we came up with will work.
Run the bilge out the transom. And… Five Guys cheeseburger – now you see it, now you don't!
3M 5200 is hand stuff to seal that bottom plate with
great video to see thanks take care
Fire it up, fire it up, fire it up! SHUT UP!!! Oops, wrong channel. 😬 lol
I really enjoyed this project. I just wanted to say if the front sprocket has the same number of teeth as the original one on the original engine then you should be fine leaving the original size sprocket on the jack shaft since both engines probably have about the same rpm redline. Or close enough to work anyway.
Love the gaden sculpture – "Tractor on a mountain." – very artistic. 👍👌😁
You just had to show that cheeseburger didn't you. Good thing I'm going to town later.
5/11 videos in and I just now noticed that this thing does not have any kind of propeller. Just the tires as paddlewheels.
Holes in the bottom of a boat. Now there's an idea… Go for it, Mustie… Paddles and a life vest…
You are incredible! What an excellent job. I had a difficult time envisioning where you were going with the new engine but I have to say it came out beautiful! Having spent many hours in the tiny engine room of my 37' sailboat, I'd like to suggest that you paint the engine compartment and give it the finishing touch. I used white, marine two part epoxy that was durable and brightened up the otherwise dark space.
five guys is the best
You ain't cheap when it comes to food those are expensive
I've done worse buffing out yachts while they're still in the water catch the cord and it tries to handcuff you to the buffer you better be ready to throw that fucking thing off quick
Go to home Depot on Manchester metals and buy a little piece of aluminum diamond plate
Same thing with any fiberglass nose on an 18-wheeler or box truck they all have fenders and replaceable
Corvettes don't look like they have fenders and quarter panels but they do I have replaced them