a friend got this non running pressure washer did a tune up to get it running but it will give a nasty pull start kick back. lets see what causes it and what it takes to fix it.
one mans junk is another mans treasure…
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Make sure nothing is behind you and it is turned on before you start yanking the cord. My elbow still hurts.
i didnt know you can run the pump dry..i always thought it had to have water going to it.
The WGen3600DFv Is Small & Compact.
C'mon Musty….Shudda addressed that reloef valve for us too!
Love your teachings sir
I really appreciate this video because I have a similar jet wash with a similar problem but you don’t have a leak at the back of the jet wash it’s an overflow which stops the water from cycling around the pump and building too much pressure up and destroying it if the water cycle is around the pump too much it will heat up the overflow helps the water continuously flow through the pump without building pressure which helps it stay cooler for longer so please don’t fix that leak 😂😂😂👍👍🥰👍
Bought a toro personal pace no spark came with 2 extra coils. No spark. Coil upside-down
Had a few honda generators with broken pushrod guide plates would pull rope out of your hand. They had many hours on them
I loved this Darren
Mustie. How many times have you pulled on a pull cord in you life? Roughly. 🤣
coil on wrong that will do it
it's always the top or bottom shear key that will do that never heard of bad gas doing that
Побольше таких видео, хотя от куда взять столько времени
Well explained video! Thank you!
Great video and nice getting it going strong again. As soon as you pulled the blower housing off I saw the coil was upside down. Most of the time if not all of the time, the coil wire is always on top
I had a wood splitter pull the rope out your hand even with a different engine.
She's a leaker! 🤣