I picked up this machine along with another during our fall bulk item garbage day, it looks like it sat in the woods for 30 years. lets see if we can bring it back to life spending no money,

By Mustie

15 thoughts on “Free junked suzuki 4 wheeler, will it still run? part 2 of 3”
  1. Avataaar/Circle Created with python_avatars john clements says:

    Too much theatre!

  2. Avataaar/Circle Created with python_avatars Mat Sullivan says:

    This is the best way to learn & get confidence to do your own maintenance and repairs & itโ€™s a great feeling to succeed! Well done @mustie1 โคyour work and knowledge! Itโ€™s given alittle something back to me I thought I lost years ago.
    Alittle something backโ€ฆ thatโ€™s enough you guys ๐Ÿ˜†

  3. Avataaar/Circle Created with python_avatars Christopher Wheeler says:

    This man is no quitter, that's for sure. I am surprised how often lubrication is seen as the last resort rather than the first. 'If it doesn't move and it should use WD-40. (If it does move and shouldn't, use duct tape')

  4. Avataaar/Circle Created with python_avatars volvod244 says:

    the engine spins the right way its only Flip 180 . normal you have the exhaust pipe in the Front not the back. same white the carburetor in the back not the front ๐Ÿ˜…

  5. Avataaar/Circle Created with python_avatars volvod244 says:

    very imprest of you Patience's . and how you can laugh if off when you injured you're self. ๐Ÿ˜… almost what's all of you videos. son I bee in the right Year ๐Ÿ˜…

  6. Avataaar/Circle Created with python_avatars Jan Kro says:

    Carb was full of gas powder, just add water and you got instant gas๐Ÿ˜‚๐Ÿ˜‚

  7. Avataaar/Circle Created with python_avatars Hubert Bent says:

    Love your videos

  8. Avataaar/Circle Created with python_avatars Wikkid Me says:

    Spray that sucker down with wd40

  9. Avataaar/Circle Created with python_avatars JohnnieBravo1 says:

    Glad I stumbled across your channel! Now I understand the drive mechanism completely, so's I can see how to service and tune the clutch on my daughter's LT80. I gave it to her when she was 11, and she rode it infrequently over the years (she's 26 now). I offered to get her a larger quad, like a Honda 400 EX or something similar, but she will NOT give that little Suzy up. And it is stupid fast, especially for a pocket quad.

  10. Avataaar/Circle Created with python_avatars imhooks says:

    im fucking terrified watching you drill that crank lol.

  11. Avataaar/Circle Created with python_avatars Steven9675 says:

    The right stuff?โ€ฆโ€ฆ.. would be a new gasket? ๐Ÿ˜† lol

  12. Avataaar/Circle Created with python_avatars John Clarke says:

    They are called anti-rotation pins. The keep the rings in place on the piston.

  13. Avataaar/Circle Created with python_avatars John Clarke says:

    I would pour some two cycle in the crankcase and rinse it out a few times.

  14. Avataaar/Circle Created with python_avatars John Clarke says:

    It is called primary compression. The top of the cylinder provides secondary compression.

  15. Avataaar/Circle Created with python_avatars Groovey Grubworm says:

    I wish they had a "scrap day" where I live, where people put stuff like that out to get rid of.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.