mocked up the drive and the exhaust,

By Mustie

17 thoughts on “More board track racer, and the westy”
  1. Avataaar/Circle Created with python_avatars Marsh Monster says:

    Hey mustie1. Thank you so much for the information on the board track racer. I have been trying to figure out for 6 months how to make hands for a minion that I made for my daughter. Your exhaust tip gave me an awesome idea thank you so much.

  2. Avataaar/Circle Created with python_avatars patricia craig says:

    Enjoy your vidio as usual!

  3. Avataaar/Circle Created with python_avatars David Catanach says:

    What’s the problem? The leaking water should dilute the leaking gas making it safe – good to go!

  4. Avataaar/Circle Created with python_avatars Cameron Moffitt says:

    Sounds good

  5. Avataaar/Circle Created with python_avatars Duncan Mac says:

    Are you seeing this comment? I ask because I'm experiencing some notification troubles with YouTube. Thanks for the video.

  6. Avataaar/Circle Created with python_avatars Formula400Pontiac says:

    Preparation: take of bottom of soda bottle and make a good fit with the neck on the pressure bowl. This you should fill with premixed coolant (good fit will ease the job) Next drive the front of the car up on a ramp or a lift so that the front is about 3-4foot higher than the rear.
    note. If extra circulation pump – check function before going further. Startup.
    Adjust throttle to about 2K rpm's (assures good circulation). Bleed out air in the radiator (in front) and refill. cont…

  7. Avataaar/Circle Created with python_avatars lastisjordanator says:

    its been great getting updates on your Westy project! your folks are gonna be pumped, its really coming along!

  8. Avataaar/Circle Created with python_avatars MrComaToes says:

    Yeah, no kidding… the stuff you get at the prices you get it, gotta be some kinda secret!

  9. Avataaar/Circle Created with python_avatars Mustie1 says:

    I hope it cures it but id say 50/50 that it will,

  10. Avataaar/Circle Created with python_avatars Mustie1 says:

    can I make mine with tracks too,

  11. Avataaar/Circle Created with python_avatars Mustie1 says:

    thanks its starting to take shape

  12. Avataaar/Circle Created with python_avatars Mustie1 says:

    sucks when theres more shoppers then sellers

  13. Avataaar/Circle Created with python_avatars Mustie1 says:

    thanks for watchin Darrin

  14. Avataaar/Circle Created with python_avatars Mustie1 says:

    thanks it was fun to make

  15. Avataaar/Circle Created with python_avatars Mustie1 says:

    I did well

  16. Avataaar/Circle Created with python_avatars Mustie1 says:

    thanks for watchin Rick

  17. Avataaar/Circle Created with python_avatars Mustie1 says:

    thanks

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.