moving a free shed from the house next door

By Mustie

18 thoughts on “Old kubota l185 pulling a shed”
  1. Avataaar/Circle Created with python_avatars don cook says:

    TUTORIAL ON HOW NOT TO MOVE A SHED

  2. Avataaar/Circle Created with python_avatars Robert Willingham says:

    Car dolly…

  3. Avataaar/Circle Created with python_avatars David Phillips says:

    I would have Put on rollers

  4. Avataaar/Circle Created with python_avatars helland says:

    With that strap setup you're at least pushing the whole load, not pulling.

  5. Avataaar/Circle Created with python_avatars Raymond Stanis says:

    NIce and easy front set of forks for the bucket attachment and a a very dependable tractor to keep always.

  6. Avataaar/Circle Created with python_avatars Dwayne Miller says:

    I used to work for a shed company my father's please put them on pipes we had Johnson bars where's the level them off on blocks!!! Using a Johnson bar

  7. Avataaar/Circle Created with python_avatars MsDrunkGamer says:

    Great, moved the shed and broke a garden for your neighbor for free!

  8. Avataaar/Circle Created with python_avatars thomas maffetone says:

    pvc pipe and 2 elbows on front like a sled i moved mine 400 feet with no problem and no damage to my grass

  9. Avataaar/Circle Created with python_avatars Great Citizen says:

    Hi Mustie1 a skid on the front would be nice or some 6 inch or grater long poles to roll on.?

  10. Avataaar/Circle Created with python_avatars wayne smith says:

    just saw this 8 years later; good god, man!.. a half dozen pcs. of 2×6 and some round firewood, and you and the wifey coulda almost pushed it home : maybe hooked up a couple of those lazy dogs to help lol fun destruction vid tho!

  11. Avataaar/Circle Created with python_avatars Marsh Monster says:

    Next time you try to move one of those mustie1 if you can find some big lag bolts lag bolts and four by fours up underneath the front in the corners and run your strap underneath Each corner. That way when you go to pull on it it'll pull that front corner up in the air and actually slide.

  12. Avataaar/Circle Created with python_avatars abrixtonboy says:

    A man moving his home comes to mind. Sticking some rollers underneath might help help.

  13. Avataaar/Circle Created with python_avatars DIY My Way says:

    Didn’t know a tractor that old had an autopilot! 😀

  14. Avataaar/Circle Created with python_avatars S Bains says:

    Drivers less tractor

  15. Avataaar/Circle Created with python_avatars patricia craig says:

    Useful!

  16. Avataaar/Circle Created with python_avatars Michael M says:

    You have tynes on the tractor, why not lift the front edge and strap it as you have and pull it backwards seems easier than ploughing the topsoil just a thought

  17. Avataaar/Circle Created with python_avatars Tom Fischer says:

    Shed guys use PVC pipe (5" dia?) to roll stuff like that.
    One guy drives, one guy keeps moving the PVC to the front.

  18. Avataaar/Circle Created with python_avatars mech cntr says:

    Getting off the tractor while it was in gear like that was stupid and dangerous. Thumbs down on this video. Please don't set that kind of example.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.