finishing the restoration of a barn find puch moped

By Mustie

18 thoughts on “Finishing the puch mk2 moped”
  1. Avataaar/Circle Created with python_avatars Joseph Peters says:

    How fast does it.go.with the 2 speed ?

  2. Avataaar/Circle Created with python_avatars Donna Gavin says:

    Awesome as always!

  3. Avataaar/Circle Created with python_avatars mrbondohrama says:

    Did he say how fast he got it going?

  4. Avataaar/Circle Created with python_avatars J Rodriguez says:

    Honda bond works real well on the handles thats awesome i have an 85 mkII LOVE IT I GOTTA CLEAN THE TANK ASWELL

  5. Avataaar/Circle Created with python_avatars bepowerification says:

    man. I remember putting a 135ccm cylinder/piston set on my 80ccm vespa back in the 90s and it was the most rewarding ride of my life after it was done – after I did it ๐Ÿ™‚

  6. Avataaar/Circle Created with python_avatars TIM Williams says:

    Time for my coffee โ˜•

  7. Avataaar/Circle Created with python_avatars Jimmy Rae says:

    Went back into the archive to watch this series. Classic Mustie getting everything just so, and dialing it in. Also classic Mustie running โ€˜er wide open, hugging the white line on the shoulder.

  8. Avataaar/Circle Created with python_avatars Jammer1 says:

    It sure sounds better !

  9. Avataaar/Circle Created with python_avatars Chad Tufts says:

    Amazing!! Love your videos!!

  10. Avataaar/Circle Created with python_avatars Tony Crabtree says:

    Find a smaller rear sprocket or bigger front sprocket. 1 or 2 tooth.

  11. Avataaar/Circle Created with python_avatars James Kenney says:

    Maybe I missed it, but what did you do to the fuel tank? Last thing I heard was you had vinegar in it. Did that help, did you coat it to seal it?

  12. Avataaar/Circle Created with python_avatars Thomas Heller says:

    Runs better than new!!

  13. Avataaar/Circle Created with python_avatars jesus leon says:

    Hey i been watching most of your videos and learned a lot from you thanks a lot great videos keep up the good work

  14. Avataaar/Circle Created with python_avatars senorboardhead says:

    You can lubricate with hair spray when putting on new grips. It is a light shellac and dries with glue properties, but can be overcome easily next grip change.

  15. Avataaar/Circle Created with python_avatars The Unpopular Opinion says:

    A friend of mine who worked at bicycle shops for over 15 years showed me a trick for putting on grips. Use hairspray, when it's wet it acts like a lubricant, then when it drys it holds them on almost like glue.

  16. Avataaar/Circle Created with python_avatars Todd Query says:

    I recognize that this is an old video, but I used to work for a bicycle shop where I learned that aerosol hairspray works great for installing hand-grips. It's "slippery when wet," but sticky when dry…grips slide right on and stay where you leave them once it dries.

  17. Avataaar/Circle Created with python_avatars Jim Bradshaw says:

    I know I'm late to the show, as it were, but thanks for these uploads – I really enjoyed following the Puch story. Wish I could find one of those here in Spain…

  18. Avataaar/Circle Created with python_avatars John McCormack says:

    Puch the magic moped, lives with Mustie And brought back to life ,shiny and purring . Instead of being rusty. Ta dah.๐Ÿ‘

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.