Sometimes just sending a little Seafoam thru the carb actually cleans out a small jet like that. Worked on my used snowblower when I got it. It didn't want to stay running until I added 1 oz. per gallon of Seafoam and it stayed running now.
Great video! I just did this to two of my machines and it worked! Thank you! I also did it to a 3rd machine with the adjustable needle – there is a really small, angled hole drilled in the side and it was partially clogged. I ran a micro drill bit through it and now the machine runs great!
Excellent advice sir, that’s what my issue is (awesome)!
Just like your video here.. excellent job, now add the rubber impeller kit and watch how well that machine blows snow alot farther and no clogs!!👍😁
Sometimes just sending a little Seafoam thru the carb actually cleans out a small jet like that. Worked on my used snowblower when I got it. It didn't want to stay running until I added 1 oz. per gallon of Seafoam and it stayed running now.
This video is why to slow.
Oooo .. Nice V.W. Bus !
Thanks Mustie1, have a Brute 10HP with the same hunting trouble, I'll have to give that a go!
A MUCH better solution than that other guy who smashes it to bits with a hammer
Thanks for the tip !
Great idea! I'm going to try it. Thanks for making the video
Thank you for information. 👌
nice job… thanks for all the videos…
Great video! I just did this to two of my machines and it worked! Thank you! I also did it to a 3rd machine with the adjustable needle – there is a really small, angled hole drilled in the side and it was partially clogged. I ran a micro drill bit through it and now the machine runs great!
Shit I did the side holes instead on accident and put it together will see if it runs tomorrow