16 thoughts on “Schwinn muscle bike engine cold start and first ride”
I just got my own 2 cycle on a mountain bike 26". I love it so much. It's mostly used for back and forth to work, 1 and 1/2 miles each way. LOVE it! Love your builds too.
I think those 'rag joint' sprockets are drilled for 26" rims with 36 spokes.9 bolts ,so it is uniform. Thatrag joint and china metal is the 2 common complaints. But if you just keep on top of. Stuff,and make a top mount,theyre not bad.Looks cool !
You get what you pay for they're fun kits they're made to buy all the upgrades for you start getting into the upgrades and there are better and better not necessarily performance-wise like their tensioners they got a new rear bolting sprocket that bolts to the hub itself or you can always go the route I'm going to try and get you one of them more modern disc brake Wheels and just drill out to match your sprocket I seen a YouTube video on it and had talked. To him he said he's had good luck with it but they're fun I've got when I just put together on a 26 inch beach cruiser love the videos
That looks cool I have worked on old bikes for years and have always wanted to put a engine on one That is a neat choice since they had a motorcycle look to them
I just got my own 2 cycle on a mountain bike 26". I love it so much. It's mostly used for back and forth to work, 1 and 1/2 miles each way. LOVE it! Love your builds too.
Okay finish watching the video very in. Looks like that thing scary as all get-out to ride the way it's tear so quickly.
You Build Better Engine's ( Motor/Bikes than that!!!
Yu got the spring right . White wire is 6v lighting sys . But it take power away from the motor
I think those 'rag joint' sprockets are drilled for 26" rims with 36 spokes.9 bolts ,so it is uniform. Thatrag joint and china metal is the 2 common complaints. But if you just keep on top of. Stuff,and make a top mount,theyre not bad.Looks cool !
Nice ! Thumbs up liked.
You get what you pay for they're fun kits they're made to buy all the upgrades for you start getting into the upgrades and there are better and better not necessarily performance-wise like their tensioners they got a new rear bolting sprocket that bolts to the hub itself or you can always go the route I'm going to try and get you one of them more modern disc brake Wheels and just drill out to match your sprocket I seen a YouTube video on it and had talked. To him he said he's had good luck with it but they're fun I've got when I just put together on a 26 inch beach cruiser love the videos
The reason I know this is cause I built 7 so far and have worked on 5 others to date…..
Your right were the springs go,as far as the white wire that can go to your 6-volt headlamp,but it does take away from your engine power
True That!
Small spring goes to the clutch handle Big Spring over the whole wire casing on the engine so it doesn't burn up
The wite wire is the kill wire'
dammitt, yo are like a big kid, love it, keep up the good work
Like it. I built 2 of these. One 50cc and one 80cc. Also built 6 of the electric hub kit bikes. 5 on trikes. Lots of fun.
Love it! I would use an old Huffy, like my 1967 Huffy Rail 5 speed I had when I was a kid
That looks cool I have worked on old bikes for years and have always wanted to put a engine on one That is a neat choice since they had a motorcycle look to them
the white for the kille switch